Ideas Test


A auto (re)trigger function.

It would be handy to constantly monitor a signal, without the need to repeatedly pushing the mouse button.

  • Avatar32.5fb70cce7410889e661286fd7f1897de Guest
  • Aug 2 2018
  • Planned
  • Aug 2, 2018

    Admin Response

    This will be supported as part of real time view
  • Attach files
  • Avatar40.8f183f721a2c86cd98fddbbe6dc46ec9
    Guest commented
    August 02, 2018 17:17

    It would be very handy if the software would support an auto (re)trigger mode where setting a dead time (delay after a trigger event) afterwards the Saleae automatically starts waiting for the next trigger event is possible.

    While waiting for a subsequent trigger event, the previous captured signals shall be shown at the capture screen. If a number of maximum (re)trigger events is set, the software shall store single capture results in separate tabs (like sime oscilloscopes' segmented memory feature does). Otherwise the software shall overwrite previous results with the current one.

  • Avatar40.8f183f721a2c86cd98fddbbe6dc46ec9
    Guest commented
    August 02, 2018 17:17

    Maybe to clarify:
    Sometimes I only interested for the time around the last trigger. E.g. normally my software set a trigger every 1s and there is something wrong if there is no trigger anymore, so I want to check the waves after the last trigger to find out was was going wrong.
    --> Implementation: re-trigger if there is again a trigger during the "Duration" time.