Ideas Test

10 VOTE

Have a Trigger output wire in order to trigger an Osciloscope

  • Avatar32.5fb70cce7410889e661286fd7f1897de Guest
  • Jun 26 2018
  • Attach files
  • Avatar40.8f183f721a2c86cd98fddbbe6dc46ec9
    Guest commented
    26 Jun 19:29

    An external trigger output would dramatically improve the Logic devices. I often had to find hardware failures caused by power and signal integrity issues. MSOs helped but before those the logic analyzer trigger capabilities were often needed. MSOs are often not very good analyzers.

  • Avatar40.8f183f721a2c86cd98fddbbe6dc46ec9
    Guest commented
    26 Jun 19:29

    this could be performed using 3 party HW like a COM Port, without HW modification for low cost triggering on previous HW

  • Avatar40.8f183f721a2c86cd98fddbbe6dc46ec9
    Guest commented
    26 Jun 19:29

    This is an excellent idea. Essentially, it would allow you to use an affordable oscilloscope as an MSO. MSO's are typically much more expensive than a standard O-scope. With this feature, a Logic would more than pay for itself when coupled with an Oscilloscope. In my opinion, this is would make Logics more attractive than the more expensive LogicStudio.

  • Avatar40.8f183f721a2c86cd98fddbbe6dc46ec9
    Guest commented
    26 Jun 19:29

    Could also be used to reset the device under test.

  • Avatar40.8f183f721a2c86cd98fddbbe6dc46ec9
    Guest commented
    26 Jun 19:29

    This would also allow Logics to be interconnected and share a timebase.